Loewe TV HDMI Specifications and Service Menu
Loewe TVs don’t have four equal HDMI ports: bandwidth, HDR and Dolby Vision differ from port to port and from chassis to chassis. Plug a 4K HDR source into the wrong port and you get 30 Hz or no HDR at all. This note puts the specifications from Loewe’s manual into a more readable form.
Source: Loewe bild user manual, technical data, “Signale über HDMI/AV (PC IN)”, 2021, pages 225–227 (PDF, German). If you don’t know your TV’s chassis, look it up in the technical data of its manual. Models with a Full HD panel (1920 × 1080) can’t show UHD on any port.
Which port for what#
| Chassis | UHD with HDR at 60 Hz | Dolby Vision | ARC |
|---|---|---|---|
| SL5xx OLED | HDMI 1, 2, 3, 4 | HDMI 1, 2, 3, 4 | HDMI 1 |
| SL5xx LCD | HDMI 1, 2, 3, 4 | – | HDMI 1 |
| SL4xx OLED | HDMI 1, 2, 4 | HDMI 4 | HDMI 1 |
| SL4xx LCD | HDMI 1, 2 | – | HDMI 1 |
| SL3xx LCD | – (UHD only up to 30 Hz, no HDR) | – | HDMI 1 |
HDR here means HDR10 and HLG. At 50/60 Hz, HDR runs with 4:2:0 chroma subsampling; with full 4:4:4 colour, UHD with HDR is limited to 30 Hz on every port (see colour depth).
On an SL4xx OLED, use HDMI 4 for a game console or streaming box: it’s the only port there with Dolby Vision. On every chassis, the soundbar goes into HDMI 1, the only port with ARC.
Per chassis#
✓ = supported, – = not supported. Bandwidth as given by Loewe.
SL5xx (OLED and LCD)#
| Port | Bandwidth | UHD 50/60 Hz | HDR10 / HLG | Dolby Vision | ARC |
|---|---|---|---|---|---|
| HDMI 1 | 600 MHz | ✓ | ✓ | OLED only | ✓ |
| HDMI 2 | 600 MHz | ✓ | ✓ | OLED only | – |
| HDMI 3 | 600 MHz | ✓ | ✓ | OLED only | – |
| HDMI 4 | 600 MHz | ✓ | ✓ | OLED only | – |
SL4xx OLED#
| Port | Bandwidth | UHD 50/60 Hz | HDR10 / HLG | Dolby Vision | ARC |
|---|---|---|---|---|---|
| HDMI 1 | 450 MHz | ✓ | ✓ | – | ✓ |
| HDMI 2 | 450 MHz | ✓ | ✓ | – | – |
| HDMI 3 | 300 MHz | ✓ (4:2:0, 8 bit) | – | – | – |
| HDMI 4 | 600 MHz | ✓ | ✓ | ✓ | – |
SL4xx LCD#
| Port | Bandwidth | UHD 50/60 Hz | HDR10 / HLG | Dolby Vision | ARC |
|---|---|---|---|---|---|
| HDMI 1 | 450 MHz | ✓ | ✓ | – | ✓ |
| HDMI 2 | 450 MHz | ✓ | ✓ | – | – |
| HDMI 3 | 300 MHz | ✓ (4:2:0, 8 bit) | – | – | – |
| HDMI 4 | 300 MHz | ✓ (4:2:0, 8 bit) | – | – | – |
SL3xx LCD#
| Port | Bandwidth | UHD 50/60 Hz | HDR10 / HLG | Dolby Vision | ARC |
|---|---|---|---|---|---|
| HDMI 1 | 300 MHz | – (UHD up to 30 Hz) | – | – | ✓ |
| HDMI 2 | 300 MHz | – (UHD up to 30 Hz) | – | – | – |
| HDMI 3 | 300 MHz | – (UHD up to 30 Hz) | – | – | – |
| HDMI 4 | 300 MHz | – (UHD up to 30 Hz) | – | – | – |
All ports of all chassis accept the usual lower resolutions, from 640 × 480 up to 1920 × 1080 at 50/60 Hz.
Colour depth at UHD#
Colour formats each port accepts at 3840 × 2160:
| Ports | 24–30 Hz 4:4:4 | 24–30 Hz 4:2:2 | 50/60 Hz 4:4:4 | 50/60 Hz 4:2:2 | 50/60 Hz 4:2:0 |
|---|---|---|---|---|---|
| SL5xx, HDMI 1–4 | 8/10/12 bit | 8 bit | 8 bit | 8 bit | 8/10/12 bit |
| SL4xx OLED HDMI 4, SL4xx HDMI 1–2 | 8/10/12 bit | 8 bit | – | – | 8/10/12 bit |
| SL4xx HDMI 3, SL4xx LCD HDMI 4 | 8 bit | 8 bit | – | – | 8 bit |
| SL3xx, HDMI 1–4 | 8 bit | 8 bit | – | – | – |
HDR needs 10 bit or more, so at 50/60 Hz it only works with 4:2:0. If HDR at 60 Hz doesn’t work, set the source to 4:2:0 (or automatic) instead of 4:4:4 or RGB.
Switch off the compatible mode for HDR#
SL4xx and SL5xx TVs ship with the compatible mode switched on for HDMI 1–3. In this mode the ports are limited to 300 MHz and 8 bit: no HDR, no Dolby Vision, and the manual lists UHD at 50/60 Hz as unsupported. The SL3xx has no compatible mode.
To use HDR, switch it off under System settings → Connections → HDMI → Compatible mode (German menu: Systemeinstellungen → Anschlüsse → HDMI → kompatibler Modus). If an older source shows no picture afterwards, switch it back on for that port.
VGA (PC IN)#
With Loewe’s VGA adapter on the AV (PC IN) connector, SL3xx and SL4xx TVs accept PC resolutions from 640 × 480 to 1280 × 1024 at 60 Hz and video up to 1920 × 1080 at 50/60 Hz. The SL5xx doesn’t support the adapter.
Service menu#
On TVs without controls on the chassis (those with the newer Loewe eye), open
System settings → Extras and type 756393 on the remote. No input field
appears while you type.
On a phone keypad the digits spell SLOEWE, short for “Servicemenü Loewe”.